Section 442-01: General | ![](/icons/ecblank.gif) |
| 442-01-01 | | rated value | ![](/icons/ecblank.gif) |
| 442-01-02 | | rated current (for accessories) | ![](/icons/ecblank.gif) |
| 442-01-03 | | rated voltage (for accessories) | ![](/icons/ecblank.gif) |
| 442-01-04 | | nominal value | ![](/icons/ecblank.gif) |
| 442-01-05 | | recovery voltage | ![](/icons/ecblank.gif) |
| 442-01-06 | | rated control voltage | ![](/icons/ecblank.gif) |
| 442-01-07 | | rated operating voltage | ![](/icons/ecblank.gif) |
| 442-01-08 | | base (of an accessory) | ![](/icons/ecblank.gif) |
| 442-01-09 | | metal components | ![](/icons/ecblank.gif) |
| 442-01-10 | | insulating components | ![](/icons/ecblank.gif) |
| 442-01-11 | | composite components | ![](/icons/ecblank.gif) |
| 442-01-12 | | non-flame propagating component | ![](/icons/ecblank.gif) |
| 442-01-13 | | external influences | ![](/icons/ecblank.gif) |
| 442-01-14 | | moulded-on accessory | ![](/icons/ecblank.gif) |
| 442-01-15 | | accessible part | ![](/icons/ecblank.gif) |
| 442-01-16 | | detachable part | ![](/icons/ecblank.gif) |
| 442-01-17 | | rewirable accessory | ![](/icons/ecblank.gif) |
| 442-01-18 | | non-rewirable accessory | ![](/icons/ecblank.gif) |
| 442-01-19 | | operational insulation | ![](/icons/ecblank.gif) |
| 442-01-20 | | overcurrent | ![](/icons/ecblank.gif) |
| 442-01-21 | | exposed conductive part | ![](/icons/ecblank.gif) |
| 442-01-22 | | temperature rise | ![](/icons/ecblank.gif) |
| 442-01-23 | | earth fault current | ![](/icons/ecblank.gif) |
| 442-01-24 | | earth leakage current | ![](/icons/ecblank.gif) |
| 442-01-25 | | signal indicator | ![](/icons/ecblank.gif) |
| 442-01-26 | | unprepared conductor | ![](/icons/ecblank.gif) |
| 442-01-27 | | prepared conductor | ![](/icons/ecblank.gif) |
| 442-01-28 | | pollution | ![](/icons/ecblank.gif) |
| 442-01-29 | | micro-environment | ![](/icons/ecblank.gif) |
| 442-01-30 | | clean situation | ![](/icons/ecblank.gif) |
| 442-01-31 | | normal situation | ![](/icons/ecblank.gif) |
| 442-01-32 | | dirty situation | ![](/icons/ecblank.gif) |
| 442-01-33 | | interlock of a plug | ![](/icons/ecblank.gif) |
| 442-01-34 | | type X attachment | ![](/icons/ecblank.gif) |
| 442-01-35 | | type Y attachment | ![](/icons/ecblank.gif) |
| 442-01-36 | | type Z attachment | ![](/icons/ecblank.gif) |
| 442-01-37 | | external conductor | ![](/icons/ecblank.gif) |
| 442-01-38 | | integrated conductor | ![](/icons/ecblank.gif) |
| 442-01-39 | | internal conductor | ![](/icons/ecblank.gif) |
| 442-01-40 | | live part | ![](/icons/ecblank.gif) |
| 442-01-41 | | tracking | ![](/icons/ecblank.gif) |
| 442-01-42 | | proof tracking index | ![](/icons/ecblank.gif) |
| 442-01-43 | | thermal cut-out | ![](/icons/ecblank.gif) |
| 442-01-44 | | current cut-out | ![](/icons/ecblank.gif) |
| 442-01-45 | | trip-free mechanism | ![](/icons/ecblank.gif) |
| 442-01-46 | | switching device | ![](/icons/ecblank.gif) |
| 442-01-47 | | prospective current | ![](/icons/ecblank.gif) |
| 442-01-48 | | making capacity | ![](/icons/ecblank.gif) |
| 442-01-49 | | breaking capacity | ![](/icons/ecblank.gif) |
| 442-01-50 | | operating cycle | ![](/icons/ecblank.gif) |
| 442-01-51 | | uninterrupted neutral | ![](/icons/ecblank.gif) |
| 442-01-52 | | main contact | ![](/icons/ecblank.gif) |
| 442-01-53 | | common type reference (for accessories) | ![](/icons/ecblank.gif) |
| 442-01-54 | | unique type reference (for accessories) | ![](/icons/ecblank.gif) |
| 442-01-55 | | macro-environment | ![](/icons/ecblank.gif) |
Section 442-02: Cable management systems | ![](/icons/ecblank.gif) |
| 442-02-01 | | cable management | ![](/icons/ecblank.gif) |
| 442-02-02 | | conduit system | ![](/icons/ecblank.gif) |
| 442-02-04 | | conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-05 | | plain conduit | ![](/icons/ecblank.gif) |
| 442-02-06 | | corrugated conduit | ![](/icons/ecblank.gif) |
| 442-02-07 | | rigid conduit | ![](/icons/ecblank.gif) |
| 442-02-08 | | pliable conduit | ![](/icons/ecblank.gif) |
| 442-02-09 | | self-recovering conduit | ![](/icons/ecblank.gif) |
| 442-02-10 | | flexible conduit | ![](/icons/ecblank.gif) |
| 442-02-11 | | insulating conduit | ![](/icons/ecblank.gif) |
| 442-02-12 | | metal conduit | ![](/icons/ecblank.gif) |
| 442-02-13 | | non-metallic conduit | ![](/icons/ecblank.gif) |
| 442-02-14 | | composite conduit | ![](/icons/ecblank.gif) |
| 442-02-15 | | extra-heavy duty rigid steel conduit | ![](/icons/ecblank.gif) |
| 442-02-16 | | non-flame propagating conduit | ![](/icons/ecblank.gif) |
| 442-02-17 | | threadable conduit | ![](/icons/ecblank.gif) |
| 442-02-18 | | non-threadable conduit | ![](/icons/ecblank.gif) |
| 442-02-19 | | wall thickness (of a conduit) | ![](/icons/ecblank.gif) |
| 442-02-20 | | material thickness of a plain conduit | ![](/icons/ecblank.gif) |
| 442-02-21 | | material thickness of a corrugated conduit | ![](/icons/ecblank.gif) |
| 442-02-22 | | material thickness of a combined plain and corrugated conduit | ![](/icons/ecblank.gif) |
| 442-02-23 | | insulating conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-24 | | metal conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-25 | | non-metallic conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-26 | | composite conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-27 | | non-flame propagating conduit fitting | ![](/icons/ecblank.gif) |
| 442-02-28 | | conduit joint | ![](/icons/ecblank.gif) |
| 442-02-29 | | threaded coupling (of a conduit) | ![](/icons/ecblank.gif) |
| 442-02-30 | | elbow (of a conduit) | ![](/icons/ecblank.gif) |
| 442-02-31 | | nipple (of a conduit) | ![](/icons/ecblank.gif) |
| 442-02-32 | | threadable entry for conduit | ![](/icons/ecblank.gif) |
| 442-02-33 | | non-threadable entry for conduit | ![](/icons/ecblank.gif) |
| 442-02-35 | | cable ducting system | ![](/icons/ecblank.gif) |
| 442-02-36 | | system components (of trunking or ducting systems) | ![](/icons/ecblank.gif) |
| 442-02-37 | | trunking length | ![](/icons/ecblank.gif) |
| 442-02-39 | | fitting (of trunking or ducting systems) | ![](/icons/ecblank.gif) |
| 442-02-40 | | fixing device | ![](/icons/ecblank.gif) |
| 442-02-41 | | apparatus mounting device | ![](/icons/ecblank.gif) |
| 442-02-42 | | floor service unit | ![](/icons/ecblank.gif) |
| 442-02-43 | | floor access unit | ![](/icons/ecblank.gif) |
Section 442-02: | ![](/icons/ecblank.gif) |
| 442-02-03 | | conduit | ![](/icons/ecblank.gif) |
| 442-02-34 | | cable trunking system | ![](/icons/ecblank.gif) |
| 442-02-38 | | ducting length | ![](/icons/ecblank.gif) |
Section 442-03: Plugs and socket-outlets | ![](/icons/ecblank.gif) |
| 442-03-01 | | plug | ![](/icons/ecblank.gif) |
| 442-03-02 | | socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-03 | | plug and socket outlet | ![](/icons/ecblank.gif) |
| 442-03-04 | | fixed socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-05 | | shutter | ![](/icons/ecblank.gif) |
| 442-03-06 | | interlocked socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-07 | | portable socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-08 | | multiple socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-09 | | socket-outlet for appliances | ![](/icons/ecblank.gif) |
| 442-03-10 | | retaining device | ![](/icons/ecblank.gif) |
| 442-03-11 | | fused plug | ![](/icons/ecblank.gif) |
| 442-03-12 | | polarized plug | ![](/icons/ecblank.gif) |
| 442-03-13 | | switched socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-14 | | multiple switched socket-outlet | ![](/icons/ecblank.gif) |
| 442-03-15 | | cable reel | ![](/icons/ecblank.gif) |
| 442-03-16 | | portable cable reel | ![](/icons/ecblank.gif) |
| 442-03-17 | | fixed cable reel | ![](/icons/ecblank.gif) |
| 442-03-18 | | non-detachable flexible cable or cord | ![](/icons/ecblank.gif) |
| 442-03-19 | | adaptor (for accessories) | ![](/icons/ecblank.gif) |
| 442-03-20 | | multiway adaptor (for accessories) | ![](/icons/ecblank.gif) |
| 442-03-21 | | intermediate adaptor (for accessories) | ![](/icons/ecblank.gif) |
| 442-03-22 | | conversion adaptor (for accessories) | ![](/icons/ecblank.gif) |
Section 442-04: Switches | ![](/icons/ecblank.gif) |
| 442-04-01 | | incorporated switch | ![](/icons/ecblank.gif) |
| 442-04-02 | | integrated switch | ![](/icons/ecblank.gif) |
| 442-04-03 | | switch of micro-gap construction | ![](/icons/ecblank.gif) |
| 442-04-04 | | rotary switch | ![](/icons/ecblank.gif) |
| 442-04-05 | | lever switch | ![](/icons/ecblank.gif) |
| 442-04-06 | | rocker switch | ![](/icons/ecblank.gif) |
| 442-04-07 | | push-button switch | ![](/icons/ecblank.gif) |
| 442-04-08 | | cord operated switch | ![](/icons/ecblank.gif) |
| 442-04-09 | | push-pull switch | ![](/icons/ecblank.gif) |
| 442-04-10 | | biased switch | ![](/icons/ecblank.gif) |
| 442-04-11 | | cord switch | ![](/icons/ecblank.gif) |
| 442-04-12 | | direct actuation | ![](/icons/ecblank.gif) |
| 442-04-13 | | indirect actuation | ![](/icons/ecblank.gif) |
| 442-04-14 | | actuating member | ![](/icons/ecblank.gif) |
| 442-04-15 | | actuating means | ![](/icons/ecblank.gif) |
| 442-04-16 | | full-disconnection | ![](/icons/ecblank.gif) |
| 442-04-17 | | micro-disconnection | ![](/icons/ecblank.gif) |
| 442-04-18 | | electromechanically operated contact mechanism | ![](/icons/ecblank.gif) |
| 442-04-19 | | semiconductor switching device | ![](/icons/ecblank.gif) |
| 442-04-20 | | electronic momentary contact switch | ![](/icons/ecblank.gif) |
| 442-04-21 | | mechanical control unit | ![](/icons/ecblank.gif) |
| 442-04-22 | | electronic control unit | ![](/icons/ecblank.gif) |
| 442-04-23 | | electronic extension unit | ![](/icons/ecblank.gif) |
| 442-04-24 | | protective impedance | ![](/icons/ecblank.gif) |
| 442-04-25 | | remote control switch | ![](/icons/ecblank.gif) |
| 442-04-26 | | control circuit | ![](/icons/ecblank.gif) |
| 442-04-27 | | incorporated hand-operated device (of a remote control switch) | ![](/icons/ecblank.gif) |
| 442-04-28 | | control mechanism | ![](/icons/ecblank.gif) |
| 442-04-29 | | switching circuit | ![](/icons/ecblank.gif) |
| 442-04-30 | | latching remote control switch | ![](/icons/ecblank.gif) |
| 442-04-31 | | disconnectable remote control switch | ![](/icons/ecblank.gif) |
| 442-04-32 | | delay time (of a time-delay switch) | ![](/icons/ecblank.gif) |
| 442-04-33 | | time-delay switch | ![](/icons/ecblank.gif) |
| 442-04-34 | | delay device | ![](/icons/ecblank.gif) |
| 442-04-35 | | resetting time-delay switch | ![](/icons/ecblank.gif) |
| 442-04-36 | | disconnectable time-delay switch | ![](/icons/ecblank.gif) |
| 442-04-37 | | integral switching device | ![](/icons/ecblank.gif) |
Section 442-05: Circuit-breakers and similar equipment for household use | ![](/icons/ecblank.gif) |
| 442-05-01 | | circuit-breaker | ![](/icons/ecblank.gif) |
| 442-05-02 | | residual current device | ![](/icons/ecblank.gif) |
| 442-05-03 | | residual current operated circuit-breaker without integral overcurrent protection | ![](/icons/ecblank.gif) |
| 442-05-04 | | residual current operated circuit-breaker with integral overcurrent protection | ![](/icons/ecblank.gif) |
| 442-05-05 | | time-delay RCD | ![](/icons/ecblank.gif) |
| 442-05-08 | | RCD functionally independent of line voltage | ![](/icons/ecblank.gif) |
| 442-05-09 | | RCD functionally dependent on line voltage | ![](/icons/ecblank.gif) |
| 442-05-10 | | reset RCD | ![](/icons/ecblank.gif) |
| 442-05-12 | | short-circuit protective device, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-19 | | residual current | ![](/icons/ecblank.gif) |
| 442-05-20 | | residual operating current | ![](/icons/ecblank.gif) |
| 442-05-21 | | residual non-operating current | ![](/icons/ecblank.gif) |
| 442-05-22 | | conditional residual short-circuit current | ![](/icons/ecblank.gif) |
| 442-05-23 | | limiting non-actuating time | ![](/icons/ecblank.gif) |
| 442-05-24 | | detection, <of a residual current> | ![](/icons/ecblank.gif) |
| 442-05-25 | | evaluation, <of a residual current> | ![](/icons/ecblank.gif) |
| 442-05-26 | | interruption, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-27 | | residual making and breaking capacity | ![](/icons/ecblank.gif) |
| 442-05-28 | | conditional short-circuit current | ![](/icons/ecblank.gif) |
| 442-05-30 | | auxiliary contact, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-35 | | influencing quantity, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-36 | | reference value of an influencing quantity, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-37 | | reference conditions of influencing quantities, <for a residual current device> pl | ![](/icons/ecblank.gif) |
| 442-05-38 | | preferred range of an influencing quantity, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-39 | | extreme range of an influencing quantity, <for a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-40 | | overcurrent protected pole | ![](/icons/ecblank.gif) |
| 442-05-41 | | overcurrent unprotected pole | ![](/icons/ecblank.gif) |
| 442-05-42 | | current delay angle | ![](/icons/ecblank.gif) |
| 442-05-43 | | uninterrupted duty | ![](/icons/ecblank.gif) |
| 442-05-44 | | overload release | ![](/icons/ecblank.gif) |
| 442-05-45 | | switched neutral pole | ![](/icons/ecblank.gif) |
| 442-05-46 | | instantaneous tripping current | ![](/icons/ecblank.gif) |
| 442-05-48 | | short-circuit making and breaking capacity | ![](/icons/ecblank.gif) |
| 442-05-49 | | ultimate short-circuit breaking capacity | ![](/icons/ecblank.gif) |
| 442-05-50 | | service short-circuit breaking capacity | ![](/icons/ecblank.gif) |
| 442-05-51 | | power-frequency recovery voltage | ![](/icons/ecblank.gif) |
| 442-05-54 | | conventional non-tripping current, <of a residual current operated circuit-breaker with integral overcurrent protection> | ![](/icons/ecblank.gif) |
| 442-05-55 | | conventional tripping current, <of a residual current operated circuit-breaker with integral overcurrent protection> | ![](/icons/ecblank.gif) |
| 442-05-58 | | energizing input-quantity | ![](/icons/ecblank.gif) |
| 442-05-59 | | I2t characteristic, <of a residual current device> | ![](/icons/ecblank.gif) |
| 442-05-60 | | selectivity-limit current | ![](/icons/ecblank.gif) |
| 442-05-61 | | take-over current, <of two overcurrent protective devices> | ![](/icons/ecblank.gif) |
| 442-05-65 | | arc | ![](/icons/ecblank.gif) |
| 442-05-66 | | arc fault | ![](/icons/ecblank.gif) |
| 442-05-67 | | arc fault detection device | ![](/icons/ecblank.gif) |
| 442-05-68 | | arc fault detection unit | ![](/icons/ecblank.gif) |
| 442-05-69 | | parallel arc fault | ![](/icons/ecblank.gif) |
| 442-05-70 | | series arc fault | ![](/icons/ecblank.gif) |
| 442-05-71 | | limiting value of the non-operating current in case of single-phase overcurrent | ![](/icons/ecblank.gif) |
| 442-05-72 | | residual operating direct current | ![](/icons/ecblank.gif) |
| 442-05-73 | | residual non-operating direct current | ![](/icons/ecblank.gif) |
| 442-05-74 | | residual direct making and breaking capacity | ![](/icons/ecblank.gif) |
| 442-05-75 | | conditional direct short-circuit current | ![](/icons/ecblank.gif) |
| 442-05-76 | | conditional residual direct short-circuit current | ![](/icons/ecblank.gif) |
Section 442-06: Connecting devices | ![](/icons/ecblank.gif) |
| 442-06-01 | | connecting device | ![](/icons/ecblank.gif) |
| 442-06-02 | | tapping | ![](/icons/ecblank.gif) |
| 442-06-03 | | thread-cutting screw | ![](/icons/ecblank.gif) |
| 442-06-04 | | thread-forming screw | ![](/icons/ecblank.gif) |
| 442-06-05 | | terminal (for accessories) | ![](/icons/ecblank.gif) |
| 442-06-06 | | termination | ![](/icons/ecblank.gif) |
| 442-06-07 | | flat quick-connect termination | ![](/icons/ecblank.gif) |
| 442-06-08 | | screw terminal | ![](/icons/ecblank.gif) |
| 442-06-09 | | saddle terminal | ![](/icons/ecblank.gif) |
| 442-06-10 | | saddle clamping unit | ![](/icons/ecblank.gif) |
| 442-06-11 | | screwless-type terminal | ![](/icons/ecblank.gif) |
| 442-06-12 | | clamping unit | ![](/icons/ecblank.gif) |
| 442-06-13 | | screwless-type clamping unit | ![](/icons/ecblank.gif) |
| 442-06-14 | | mantle terminal | ![](/icons/ecblank.gif) |
| 442-06-15 | | mantle clamping unit | ![](/icons/ecblank.gif) |
| 442-06-16 | | lug terminal | ![](/icons/ecblank.gif) |
| 442-06-17 | | screw-type terminal | ![](/icons/ecblank.gif) |
| 442-06-18 | | screw clamping unit | ![](/icons/ecblank.gif) |
| 442-06-19 | | screw-type clamping unit | ![](/icons/ecblank.gif) |
| 442-06-20 | | solder terminal | ![](/icons/ecblank.gif) |
| 442-06-21 | | pillar clamping unit | ![](/icons/ecblank.gif) |
| 442-06-22 | | pillar terminal | ![](/icons/ecblank.gif) |
| 442-06-23 | | stud terminal | ![](/icons/ecblank.gif) |
| 442-06-24 | | stud clamping unit | ![](/icons/ecblank.gif) |
| 442-06-25 | | female connector | ![](/icons/ecblank.gif) |
| 442-06-26 | | flat male tab | ![](/icons/ecblank.gif) |
| 442-06-27 | | junction | ![](/icons/ecblank.gif) |
| 442-06-28 | | connecting terminal plate | ![](/icons/ecblank.gif) |
| 442-06-29 | | multiway terminal block | ![](/icons/ecblank.gif) |
| 442-06-30 | | junction block | ![](/icons/ecblank.gif) |
| 442-06-31 | | tapping block | ![](/icons/ecblank.gif) |
| 442-06-32 | | rated connecting capacity | ![](/icons/ecblank.gif) |
| 442-06-33 | | insulation piercing connecting device | ![](/icons/ecblank.gif) |
| 442-06-34 | | reusable insulation piercing connecting device | ![](/icons/ecblank.gif) |
| 442-06-35 | | non-reusable insulation piercing connecting device | ![](/icons/ecblank.gif) |
| 442-06-36 | | twist-on connecting device | ![](/icons/ecblank.gif) |
| 442-06-37 | | reusable twist-on connecting device | ![](/icons/ecblank.gif) |
| 442-06-38 | | non-reusable twist-on connecting device | ![](/icons/ecblank.gif) |
| 442-06-39 | | rated insulation voltage, (of a connecting device) | ![](/icons/ecblank.gif) |
| 442-06-40 | | flat male test tab | ![](/icons/ecblank.gif) |
| 442-06-41 | | maximum permissible temperature | ![](/icons/ecblank.gif) |
Section 442-07: Appliance couplers | ![](/icons/ecblank.gif) |
| 442-07-01 | | appliance coupler | ![](/icons/ecblank.gif) |
| 442-07-02 | | connector (of an appliance coupler) | ![](/icons/ecblank.gif) |
| 442-07-03 | | appliance inlet | ![](/icons/ecblank.gif) |
| 442-07-04 | | cord set | ![](/icons/ecblank.gif) |
| 442-07-05 | | cord extension set | ![](/icons/ecblank.gif) |
| 442-07-06 | | interconnection cord set | ![](/icons/ecblank.gif) |
| 442-07-07 | | interconnection coupler | ![](/icons/ecblank.gif) |
| 442-07-08 | | appliance outlet | ![](/icons/ecblank.gif) |
| 442-07-09 | | plug connector | ![](/icons/ecblank.gif) |
Section 442-08: Boxes | ![](/icons/ecblank.gif) |
| 442-08-01 | | mounting box | ![](/icons/ecblank.gif) |
| 442-08-02 | | outlet box | ![](/icons/ecblank.gif) |
| 442-08-03 | | junction box | ![](/icons/ecblank.gif) |
| 442-08-04 | | tapping box | ![](/icons/ecblank.gif) |
Section 442-09: Insulation coordination for low voltage equipment | ![](/icons/ecblank.gif) |
| 442-09-01 | | insulation coordination | ![](/icons/ecblank.gif) |
| 442-09-02 | | homogeneous electric field | ![](/icons/ecblank.gif) |
| 442-09-03 | | inhomogeneous electric field | ![](/icons/ecblank.gif) |
| 442-09-04 | | approximately homogeneous electric field | ![](/icons/ecblank.gif) |
| 442-09-05 | | partial discharge | ![](/icons/ecblank.gif) |
| 442-09-06 | | apparent charge | ![](/icons/ecblank.gif) |
| 442-09-07 | | specified discharge magnitude | ![](/icons/ecblank.gif) |
| 442-09-08 | | critical frequency | ![](/icons/ecblank.gif) |
| 442-09-09 | | critical relative humidity | ![](/icons/ecblank.gif) |
| 442-09-10 | | rated voltage | ![](/icons/ecblank.gif) |
| 442-09-11 | | functional overvoltage | ![](/icons/ecblank.gif) |
| 442-09-12 | | lightning overvoltage | ![](/icons/ecblank.gif) |
| 442-09-13 | | switching overvoltage | ![](/icons/ecblank.gif) |
| 442-09-14 | | rated temporary overvoltage | ![](/icons/ecblank.gif) |
| 442-09-15 | | recurring peak voltage | ![](/icons/ecblank.gif) |
| 442-09-16 | | rated recurring peak voltage | ![](/icons/ecblank.gif) |
| 442-09-17 | | controlled overvoltage condition | ![](/icons/ecblank.gif) |
| 442-09-18 | | impulse withstand voltage | ![](/icons/ecblank.gif) |
| 442-09-19 | | temporary withstand overvoltage | ![](/icons/ecblank.gif) |
| 442-09-20 | | recurring peak withstand voltage | ![](/icons/ecblank.gif) |
| 442-09-21 | | inherent overvoltage control | ![](/icons/ecblank.gif) |
| 442-09-22 | | fmin | ![](/icons/ecblank.gif) |
| 442-09-23 | | dielectric withstand voltage | ![](/icons/ecblank.gif) |
| ![](/icons/ecblank.gif) |