International Electrotechnical Commission
IEC 61355 - Collection of standardized and established document kinds
 


English French

Home
Introduction
General description
Document kinds by:
Name
Keyword
DCC
Application area
Activity area
Presentation form
Identity number
Status level
Under development



 
 
Identity number:D00003
DCC:-E
Status level:Standard
Name:X Drawing
Alternative names:Plan, Section, Cut, Sketch, View
Content of information:Description:
Presentation mainly using the drawing form by showing, usually to scale, the objects and their relative position to each other.

NOTE - Plans, sections, cuts, sketches and views as defined in ISO 10209-1 are specific kinds of drawings. [IEC 61082-1]

Alternative definition:

Technical information, given on an information carrier, graphically presented in accordance with agreed rules and usually to scale [ISO 15519-1]
Activity area:Basic document kinds
Form of presentation:L - Drawing
Released on:2008-04-14
Remarks:Drawing is an elementary presentation that can be applied as a single part in a homogeneous document kind, or as one part out of several in a composite document kind.

The X in front of the name above indicates that if the document kind is homogeneous the name may be supplemented by an appropriate qualifier. For examples, see some of the references to "Applied in" below.

For a homogeneous document kind the name may also be used without qualifier provided that, when applied, the content is appropriately described by the title of the document. For further information, please refer to the "General description" to the left.

Applied in:D00231 (Welding plan), D00205 (Ground plan), D00155 (Escape plan), D00230 (Drilling plan), D00224 (Design drawing), D00209 (Static drawing), D00207 (Foundation drawing), D00223 (Concept drawing), D00157 (Fire protection plan), D00158 (Noise protection plan), D00228 (3D-drawing), D00227 (Exploded-view drawing), D00201 (Screen display layout drawing), D00208 (Reinforcement drawing), D00229 (Manufacturing drawing), D00206 (Excavation plan), D00226 (Interface drawing), D00131 (Component drawing), D00225 (Development plan), D00232 (Layout drawing), D00101 (Assembly drawing), D00098 (Installation plan (site)), D00093 (Earthing drawing (building)), D00092 (Earthing drawing (site)), D00094 (Earthing plan (site)), D00099 (Installation plan (building)), D00096 (Installation drawing (site)), D00097 (Installation drawing (building)), D00095 (Earthing plan (building)), D00089 (Cable routing drawing (site)), D00091 (Cable routing drawing (building)), D00100 (Building drawing (base document for electrical installation)), D00032 (Dimension drawing), D00086 (Site plan (base document for electrical installation)), D00010 (XXX Standard), D00064 (Arrangement drawing (equipment)), D00063 (Arrangement drawing (building)), D00062 (Arrangement drawing (site)), D00016 (XXX Report), D00012 (XXX Information), D00014 (XXX Manual), D00011 (XXX Description), D00017 (XXX Specification), D00018 (XXX Instruction (for the use of an object))
Keywords:cuts, plans, sections, sketches, views
Source references:IEC 61082-1, ISO 15519-1
Web page created 2024-03-28
© Copyright 2024 IEC, Geneva, Switzerland. All rights reserved