 | | |
|---|
 air discharge method | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| air insulated substation, AIS | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| amplitude modulation | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| anechoic chamber | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| anechoic material | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| antenna | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| antistatic material | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| artificial hand | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| auxiliary equipment | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| auxiliary equipment, AE | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| avalanche device | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| balun | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| bonding | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| broadband transmission-line termination; broadband line termination | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| burst | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| calibration | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| calibration | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| chamber validation | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| characteristic impedance | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| clamp injection | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| clamp injection device | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| clamping device | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| combination wave generator | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| common mode circuit | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| common mode conversion | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| common mode (coupling) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| common mode impedance | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| common mode voltage | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| conformance test | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| contact discharge method | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| continuous waves (CW) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| correlation algorithm | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| coupling | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| coupling clamp | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| coupling factor | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| coupling network | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| coupling network | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| coupling plane | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| coupling/decoupling network | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| current clamp | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| decoupling network | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| decoupling network | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| decoupling network, back filter | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| degradation (of performance) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| differential mode circuit | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| differential mode voltage | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| direct application | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| disturbance level | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| duration | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| earth electrode | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| earthing | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| earthing network | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| earthing system | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| earth; ground (USA) | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| effective output impedance | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| EFT/B | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| electrical installation | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| electrically independent earth electrodes | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| electromagnetic clamp | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| electromagnetic compatibility (EMC) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| (electromagnetic) compatibility level | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| electromagnetic compatibility, EMC | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| (electromagnetic) disturbance level | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| electromagnetic (EM) wave | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| electromagnetic mode | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| electromagnetic wave; EM wave | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| electromotive force | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| electrostatic discharge (ESD) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| emission | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| energy storage capacitor | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| equipotential bonding | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| EUT | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| EUT type | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| exit cable | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| facility | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| far field | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| far field region | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| field strength | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| frequency band | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| front time | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| full illumination | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| fully anechoic chamber | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| gas insulated (metal-enclosed) substation, GIS | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| gravity-dependent / -independent | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| ground reference plane (GRP) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| ground (reference) plane (GRP) | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| ground reference plane, GRP | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| high-altitude electromagnetic pulse | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| high-speed communication lines | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| holding time | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| human body-mounted equipment | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| hyper-rotated TEM waveguide | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| immersion method | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| immunity | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| immunity level | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| immunity margin | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| immunity (to a disturbance) | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| in-plant point of coupling; (abbreviation IPC) | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| independent windows method | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| indirect application | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| induction coil | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| induction coil factor | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| induction field | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| inner conductor or septum | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| intentional RF emitting device | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| interconnecting cable | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| interconnection lines | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| intrinsic field uncertainty, IFU | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| isotropic | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| malfunction | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| manipulator | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| maximum RMS value | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| measurement result | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| modified semi-anechoic chamber | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| non-constant envelope modulation | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| one-port TEM waveguide | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| ortho-angle | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| outer conductor or chassis | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| parallel-earthing conductor (PEC) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| partial illumination | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| Pc | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| point of common coupling; (abbreviation PCC) | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| polarization | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| port | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| IEC 61000-5-1, ed. 1.0 (1996) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| power port | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| primary (field) component | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| primary protection | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| proximity method | |
| IEC 61000-4-10, ed. 1.0 (1993) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| pulse width | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| quality factor (of a reverberation chamber), Q | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| reference ground | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| resultant field (amplitude) | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| reverberation chamber | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| rise time | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| rise time | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| secondary (field) component | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| secondary protection | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| semi-anechoic chamber | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| shielded enclosure | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| stripline | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| surface transfer impedance (of a coaxial line) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| surge | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| sweep | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| symmetrical lines | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| system | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| TDMA (time division multiple access) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| TEM cell | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| TEM waveguide | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| test generator | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| test set-up support | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| transceiver | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| transfer impedance (Zt) | |
| IEC 61000-5-2, ed. 1.0 (1997) | |
| transient | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| IEC 61000-4-9, ed. 1.0 (1993) | |
| transient | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| transient (adjective and noun) | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| transverse electromagnetic mode, TEM mode | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| tuner/stirrer | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| two-port TEM waveguide | |
| IEC 61000-4-20, ed. 2.0 (2010) | |
| uniform field area (UFA) | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| unsymmetric mode (coupling) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| validation | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| verification | |
| IEC 61000-4-12, ed. 2.0 (2006) | |
| IEC 61000-4-18, ed. 1.0 (2006) | |
| IEC 61000-4-2, ed. 2.0 (2008) | |
| IEC 61000-4-4, ed. 3.0 (2012) | |
| verification | |
| IEC 61000-4-5, ed. 3.0 (2014) | |
| voltage standing wave ratio | |
| IEC 61000-4-6, ed. 4.0 (2013) | |
| working volume | |
| IEC 61000-4-21, ed. 2.0 (2011) | |
| Ec | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| Et | |
| IEC 61000-4-3, ed. 3.0 (2006) | |
| Q-bandwidth (of a reverberation chamber), BWQ | |
| IEC 61000-4-21, ed. 2.0 (2011) | |