 | | |
|---|
 95 % confidence limit | |
| IEC 60216-6, ed. 2.0 (2006) | |
| absolute permittivity | |
| IEC 62631-1, ed. 1.0 (2011) | |
| absorbed dose | |
| IEC 60544-1, ed. 3.0 (2013) | |
| absorbed dose rate, | |
| IEC 60544-1, ed. 3.0 (2013) | |
| accelerated ageing | |
| IEC 60505, ed. 4.0 (2011) | |
| accelerated test | |
| IEC 60505, ed. 4.0 (2011) | |
| activation energy (Arrhenius activation energy) | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| ageing | |
| IEC 60212, ed. 3.0 (2010) | |
| IEC 60505, ed. 4.0 (2011) | |
| ageing cell | |
| IEC 62332-1, ed. 2.0 (2011) | |
| ageing stress | |
| IEC 60505, ed. 4.0 (2011) | |
| ageing temperature | |
| IEC 60216-6, ed. 2.0 (2006) | |
| analysis of variance, ANOVA | |
| IEC 60493-2, ed. 1.0 (2010) | |
| annular electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| Arrhenius equation | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| assessed thermal endurance index, ATE | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| bar electrodes | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| bifilar winding | |
| IEC 62101, ed. 1.0 (2005) | |
| bipolar impulse | |
| IEC 61934, ed. 2.0 (2011) | |
| bipolar impulse | |
| IEC 62068, ed. 1.0 (2013) | |
| bobbin | |
| IEC 61857-22, ed. 2.0 (2008) | |
| IEC 62101, ed. 1.0 (2005) | |
| breakdown voltage | |
| IEC 60243-1, ed. 3.0 (2013) | |
| calibration | |
| IEC 62758, ed. 1.0 (2012) | |
| candidate EIM | |
| IEC 60085, ed. 4.0 (2007) | |
| IEC 60216-5, ed. 3.0 (2008) | |
| candidate EIS | |
| IEC 60085, ed. 4.0 (2007) | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| candidate EIS | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62068, ed. 1.0 (2013) | |
| IEC 62332-2, ed. 1.0 (2014) | |
| candidate material | |
| IEC 60216-6, ed. 2.0 (2006) | |
| candidate model | |
| IEC 62101, ed. 1.0 (2005) | |
| Capacitance, C | |
| IEC 62631-1, ed. 1.0 (2011) | |
| censored data | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| censored data | |
| IEC 60216-1, ed. 6.0 (2013) | |
| central second moment of a data group | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| chamber | |
| IEC 60212, ed. 3.0 (2010) | |
| charging current | |
| IEC 62631-1, ed. 1.0 (2011) | |
| coil | |
| IEC 61857-21, ed. 3.0 (2009) | |
| IEC 61857-22, ed. 2.0 (2008) | |
| coil-to-coil insulation | |
| IEC 61857-21, ed. 3.0 (2009) | |
| IEC 61857-22, ed. 2.0 (2008) | |
| commingled | |
| IEC 62392, ed. 1.0 (2006) | |
| completed product | |
| IEC 61857-2, ed. 1.0 (2015) | |
| composite | |
| IEC 62392, ed. 1.0 (2006) | |
| conditioning | |
| IEC 60505, ed. 4.0 (2011) | |
| conditioning (of a specimen) | |
| IEC 60212, ed. 3.0 (2010) | |
| conduction current | |
| IEC 62631-1, ed. 1.0 (2011) | |
| confidence limit | |
| IEC 60216-1, ed. 6.0 (2013) | |
| contamination | |
| IEC 62392, ed. 1.0 (2006) | |
| control material | |
| IEC 60216-6, ed. 2.0 (2006) | |
| correlation coefficient | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| correlation coefficient | |
| IEC 60216-1, ed. 6.0 (2013) | |
| correlation time | |
| IEC 60216-5, ed. 3.0 (2008) | |
| correlation time (RTE) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| correlation time (TI) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| covariance of data groups | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| covariance (of data sets) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| covariance of data sets | |
| IEC 60216-1, ed. 6.0 (2013) | |
| current after voltage application | |
| IEC 62631-1, ed. 1.0 (2011) | |
| data group | |
| IEC 60493-2, ed. 1.0 (2010) | |
| data sub-group | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| deconvolution | |
| IEC 62758, ed. 1.0 (2012) | |
| degrees of freedom | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| degrees of freedom | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| degrees of freedom, DF | |
| IEC 60493-2, ed. 1.0 (2010) | |
| depolarization | |
| IEC 62631-1, ed. 1.0 (2011) | |
| depolarization current | |
| IEC 62631-1, ed. 1.0 (2011) | |
| destructive test | |
| IEC 60216-6, ed. 2.0 (2006) | |
| destructive test | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| diagnostic factor | |
| IEC 60505, ed. 4.0 (2011) | |
| diagnostic property | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| diagnostic test | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| diagnostic test | |
| IEC 62332-2, ed. 1.0 (2014) | |
| dielectric dissipation factor tan δ (loss tangent) | |
| IEC 62631-1, ed. 1.0 (2011) | |
| direct interaction | |
| IEC 60505, ed. 4.0 (2011) | |
| earth (ground) insulation | |
| IEC 61857-21, ed. 3.0 (2009) | |
| IEC 61857-22, ed. 2.0 (2008) | |
| earth insulation | |
| IEC 62101, ed. 1.0 (2005) | |
| Earth, ground | |
| IEC 61857-21, ed. 3.0 (2009) | |
| earth; ground (US) | |
| IEC 61857-22, ed. 2.0 (2008) | |
| EIM assessed thermal endurance index, (EIM ATE) | |
| IEC 60085, ed. 4.0 (2007) | |
| EIM relative thermal endurance index, (EIM RTE) | |
| IEC 60085, ed. 4.0 (2007) | |
| EIS assessed thermal endurance index | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62332-2, ed. 1.0 (2014) | |
| EIS assessed thermal endurance index, EIS ATE | |
| IEC 61857-1, ed. 3.0 (2008) | |
| EIS assessed thermal endurance index, (EIS ATE) | |
| IEC 60085, ed. 4.0 (2007) | |
| EIS assessed thermal endurance index, EIS ATE | |
| IEC 62332-1, ed. 2.0 (2011) | |
| EIS assessed thermal endurance index; EIS ATE | |
| IEC 62101, ed. 1.0 (2005) | |
| EIS relative thermal endurance index | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62332-2, ed. 1.0 (2014) | |
| EIS relative thermal endurance index, EIS RTE | |
| IEC 61857-1, ed. 3.0 (2008) | |
| EIS relative thermal endurance index, (EIS RTE) | |
| IEC 60085, ed. 4.0 (2007) | |
| EIS relative thermal endurance index, EIS RTE | |
| IEC 62332-1, ed. 2.0 (2011) | |
| EIS relative thermal endurance index; EIS RTE | |
| IEC 62101, ed. 1.0 (2005) | |
| elastomer and other crosslinked polymer | |
| IEC 62392, ed. 1.0 (2006) | |
| electric breakdown | |
| IEC 60243-1, ed. 3.0 (2013) | |
| electric field strength | |
| IEC 62631-1, ed. 1.0 (2011) | |
| electric flux density | |
| IEC 62631-1, ed. 1.0 (2011) | |
| electric strength | |
| IEC 60243-1, ed. 3.0 (2013) | |
| electrical insulating material | |
| IEC 62631-1, ed. 1.0 (2011) | |
| electrical insulating material | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62068, ed. 1.0 (2013) | |
| electrical insulating material, EIM | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 62392, ed. 1.0 (2006) | |
| electrical insulating material, (EIM) | |
| IEC 60085, ed. 4.0 (2007) | |
| electrical insulation system | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62068, ed. 1.0 (2013) | |
| IEC 62332-2, ed. 1.0 (2014) | |
| electrical insulation system, EIS | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| electrical insulation system, (EIS) | |
| IEC 60085, ed. 4.0 (2007) | |
| electrical insulation system, EIS | |
| IEC 62332-1, ed. 2.0 (2011) | |
| electrode arrangement | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| electrolytic corrosion | |
| IEC 60426, ed. 2.0 (2007) | |
| electron charge fluence | |
| IEC 60544-1, ed. 3.0 (2013) | |
| electron current density | |
| IEC 60544-1, ed. 3.0 (2013) | |
| enamelled winding wire | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| encapsulant | |
| IEC 61857-22, ed. 2.0 (2008) | |
| IEC 62101, ed. 1.0 (2005) | |
| encapsulated device | |
| IEC 61857-2, ed. 1.0 (2015) | |
| encapsulation | |
| IEC 61857-22, ed. 2.0 (2008) | |
| IEC 62101, ed. 1.0 (2005) | |
| end-of-life | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| end-of-life | |
| IEC 62332-2, ed. 1.0 (2014) | |
| end-point | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| end-point criterion | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| end-point criterion | |
| IEC 62332-2, ed. 1.0 (2014) | |
| end-point line | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| end-point temperature | |
| IEC 60216-6, ed. 2.0 (2006) | |
| end point | |
| IEC 60216-1, ed. 6.0 (2013) | |
| erosion, electrical | |
| IEC 60587, ed. 3.0 (2007) | |
| estimated life | |
| IEC 60505, ed. 4.0 (2011) | |
| evaluation | |
| IEC 60505, ed. 4.0 (2011) | |
| exposure | |
| IEC 60544-1, ed. 3.0 (2013) | |
| exposure temperature; T | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| exposure volume | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| extent of reaction | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| extrinsic ageing | |
| IEC 60505, ed. 4.0 (2011) | |
| feedstock recycling | |
| IEC 62392, ed. 1.0 (2006) | |
| flashover | |
| IEC 60243-1, ed. 3.0 (2013) | |
| form-wound coils | |
| IEC 61858-2, ed. 1.0 (2014) | |
| form wound winding coil | |
| IEC 61858-1, ed. 1.0 (2014) | |
| full impulse-voltage wave | |
| IEC 60243-3, ed. 3.0 (2013) | |
| functional test | |
| IEC 60505, ed. 4.0 (2011) | |
| global average temperature | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| global exposure temperature | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| group sample | |
| IEC 60493-2, ed. 1.0 (2010) | |
| halogen containing | |
| IEC 62392, ed. 1.0 (2006) | |
| halving interval | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| halving interval, HIC | |
| IEC 60216-6, ed. 2.0 (2006) | |
| halving value | |
| IEC 62332-2, ed. 1.0 (2014) | |
| impulse-voltage polarity | |
| IEC 62068, ed. 1.0 (2013) | |
| impulse-voltage repetition rate | |
| IEC 62068, ed. 1.0 (2013) | |
| impulse breakdown voltage | |
| IEC 60243-3, ed. 3.0 (2013) | |
| impulse decay time | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse decay time | |
| IEC 62068, ed. 1.0 (2013) | |
| impulse duty cycle | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse duty cycle | |
| IEC 62068, ed. 1.0 (2013) | |
| impulse rise time | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse rise time | |
| IEC 62068, ed. 1.0 (2013) | |
| impulse voltage polarity | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse voltage repetition rate | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse width | |
| IEC 61934, ed. 2.0 (2011) | |
| impulse width | |
| IEC 62068, ed. 1.0 (2013) | |
| incomplete data | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| incomplete data | |
| IEC 60216-1, ed. 6.0 (2013) | |
| indirect interaction | |
| IEC 60505, ed. 4.0 (2011) | |
| insulating material | |
| IEC 60212, ed. 3.0 (2010) | |
| insulation resistance | |
| IEC 62631-1, ed. 1.0 (2011) | |
| insulation resistance | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| insulation resistance between bar electrodes | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| insulation resistance between tapered pin electrodes | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| intended life | |
| IEC 60505, ed. 4.0 (2011) | |
| interaction | |
| IEC 60505, ed. 4.0 (2011) | |
| intrinsic ageing | |
| IEC 60505, ed. 4.0 (2011) | |
| iso box | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| life | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61251, ed. 1.0 (2015) | |
| life | |
| IEC 62068, ed. 1.0 (2013) | |
| line electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| measured resistance | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| measuring electrodes | |
| IEC 62631-1, ed. 1.0 (2011) | |
| (mechanical) recycling | |
| IEC 62392, ed. 1.0 (2006) | |
| non-destructive test | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| order-statistic | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| order-statistics | |
| IEC 60216-1, ed. 6.0 (2013) | |
| order of reaction | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| ordered data | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| ordered data | |
| IEC 60216-1, ed. 6.0 (2013) | |
| oven chamber | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| parent population | |
| IEC 60493-2, ed. 1.0 (2010) | |
| partial discharge | |
| IEC 62068, ed. 1.0 (2013) | |
| partial discharge extinction voltage | |
| IEC 62068, ed. 1.0 (2013) | |
| partial discharge inception voltage | |
| IEC 62068, ed. 1.0 (2013) | |
| partial discharge pulse | |
| IEC 61934, ed. 2.0 (2011) | |
| partial discharge pulse | |
| IEC 62068, ed. 1.0 (2013) | |
| partial discharge, PD | |
| IEC 61934, ed. 2.0 (2011) | |
| peak partial discharge magnitude | |
| IEC 61934, ed. 2.0 (2011) | |
| peak partial discharge magnitude | |
| IEC 62068, ed. 1.0 (2013) | |
| peak value (of an impulse-voltage wave) | |
| IEC 60243-3, ed. 3.0 (2013) | |
| period of conditioning | |
| IEC 60212, ed. 3.0 (2010) | |
| piezo-electric transducer | |
| IEC 62758, ed. 1.0 (2012) | |
| polarization current | |
| IEC 62631-1, ed. 1.0 (2011) | |
| Polarization, P | |
| IEC 62631-1, ed. 1.0 (2011) | |
| potentially destructive stress | |
| IEC 60505, ed. 4.0 (2011) | |
| pre-exponential factor | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| precision oven | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| precision wire-wound coils | |
| IEC 61858-2, ed. 1.0 (2014) | |
| precision wound coils | |
| IEC 61858-1, ed. 1.0 (2014) | |
| preconditioning | |
| IEC 60212, ed. 3.0 (2010) | |
| prediagnostic conditioning | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| pressure wave propagation, PWP | |
| IEC 62836, ed. 1.0 (2013) | |
| primary statistical function | |
| IEC 60493-2, ed. 1.0 (2010) | |
| proof test | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| pulsed electro-acoustic method, PEA | |
| IEC 62758, ed. 1.0 (2012) | |
| RAN1 | |
| IEC 60493-2, ed. 1.0 (2010) | |
| RAN3 | |
| IEC 60493-2, ed. 1.0 (2010) | |
| random wire-wound coils | |
| IEC 61858-2, ed. 1.0 (2014) | |
| random wound coils | |
| IEC 61858-1, ed. 1.0 (2014) | |
| rate law | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| rate of conversion | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| rate of ventilation; N | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| rate of voltage rise | |
| IEC 62068, ed. 1.0 (2013) | |
| reaction rate | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| reaction rate constant | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| recovery | |
| IEC 60212, ed. 3.0 (2010) | |
| recyclability | |
| IEC 62392, ed. 1.0 (2006) | |
| recycled polymer | |
| IEC 62392, ed. 1.0 (2006) | |
| reference EIM | |
| IEC 60085, ed. 4.0 (2007) | |
| IEC 60216-5, ed. 3.0 (2008) | |
| reference EIS | |
| IEC 60085, ed. 4.0 (2007) | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| reference EIS | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| IEC 62068, ed. 1.0 (2013) | |
| IEC 62332-2, ed. 1.0 (2014) | |
| reference model | |
| IEC 62101, ed. 1.0 (2005) | |
| reference operating conditions | |
| IEC 60505, ed. 4.0 (2011) | |
| regression analysis | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| regression analysis | |
| IEC 60216-1, ed. 6.0 (2013) | |
| regression coefficients | |
| IEC 60216-6, ed. 2.0 (2006) | |
| relative complex permittivity | |
| IEC 62631-1, ed. 1.0 (2011) | |
| relative humidity | |
| IEC 60212, ed. 3.0 (2010) | |
| relative permittivity | |
| IEC 62631-1, ed. 1.0 (2011) | |
| relative temperature endurance index | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| relative temperature index | |
| IEC 60216-8, ed. 1.0 (2013) | |
| relative thermal endurance index, RTE | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| repetitive partial discharge extinction voltage | |
| IEC 62068, ed. 1.0 (2013) | |
| repetitive partial discharge extinction voltage, RPDEV | |
| IEC 61934, ed. 2.0 (2011) | |
| repetitive partial discharge inception voltage | |
| IEC 62068, ed. 1.0 (2013) | |
| repetitive partial discharge inception voltage, RPDIV | |
| IEC 61934, ed. 2.0 (2011) | |
| repetitive voltage impulses | |
| IEC 61934, ed. 2.0 (2011) | |
| rotating machinery | |
| IEC 61857-2, ed. 1.0 (2015) | |
| sample | |
| IEC 61251, ed. 1.0 (2015) | |
| saturation vapour pressure | |
| IEC 60212, ed. 3.0 (2010) | |
| Saw coefficient | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| sealed tube | |
| IEC 62332-2, ed. 1.0 (2014) | |
| secondary statistical function | |
| IEC 60493-2, ed. 1.0 (2010) | |
| service conditions | |
| IEC 60505, ed. 4.0 (2011) | |
| service experience | |
| IEC 60505, ed. 4.0 (2011) | |
| service requirements | |
| IEC 60505, ed. 4.0 (2011) | |
| significance | |
| IEC 60216-6, ed. 2.0 (2006) | |
| space charge | |
| IEC 62758, ed. 1.0 (2012) | |
| specimen | |
| IEC 60212, ed. 3.0 (2010) | |
| IEC 61251, ed. 1.0 (2015) | |
| spring loaded electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| square of the correlation coefficient | |
| IEC 60216-8, ed. 1.0 (2013) | |
| standard deviation | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| standard deviation, SD | |
| IEC 60493-2, ed. 1.0 (2010) | |
| standard error | |
| IEC 60216-5, ed. 3.0 (2008) | |
| standard error of an estimate of the true value of a data group property | |
| IEC 60216-6, ed. 2.0 (2006) | |
| standard oven | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| standard reference atmosphere | |
| IEC 60212, ed. 3.0 (2010) | |
| subcycle | |
| IEC 60505, ed. 4.0 (2011) | |
| surface of contact | |
| IEC 60426, ed. 2.0 (2007) | |
| surface resistance | |
| IEC 62631-1, ed. 1.0 (2011) | |
| surface resistance | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistance between annular electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistance between line electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistance between line electrodes for small plates | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistance between small line electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistance between spring loaded electrodes | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| surface resistivity | |
| IEC 62631-1, ed. 1.0 (2011) | |
| surface resistivity | |
| IEC 62631-3-2, ed. 1.0 (2015) | |
| tapered pin electrodes | |
| IEC 62631-3-3, ed. 1.0 (2015) | |
| temperature deviation; δTd | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| temperature difference; δT2 | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| temperature fluctuation: δT1 | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| temperature group | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| temperature group (of specimens) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| temperature index | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| temperature index, TI | |
| IEC 60216-6, ed. 2.0 (2006) | |
| temperature variation; δTv | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| test conditions | |
| IEC 60212, ed. 3.0 (2010) | |
| test cycle | |
| IEC 60505, ed. 4.0 (2011) | |
| test group | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| test group (of specimens) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| test object | |
| IEC 60505, ed. 4.0 (2011) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| test object | |
| IEC 62332-2, ed. 1.0 (2014) | |
| test strip | |
| IEC 60426, ed. 2.0 (2007) | |
| test/lab model | |
| IEC 61857-2, ed. 1.0 (2015) | |
| thermal ageing factor | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| thermal ageing factor | |
| IEC 62332-2, ed. 1.0 (2014) | |
| thermal class | |
| IEC 60085, ed. 4.0 (2007) | |
| IEC 61857-1, ed. 3.0 (2008) | |
| IEC 62332-1, ed. 2.0 (2011) | |
| thermal class | |
| IEC 62332-2, ed. 1.0 (2014) | |
| thermal endurance graph | |
| IEC 60216-6, ed. 2.0 (2006) | |
| thermal endurance graph | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| thermal endurance graph paper | |
| IEC 60216-6, ed. 2.0 (2006) | |
| thermal endurance graph paper | |
| IEC 60216-1, ed. 6.0 (2013) | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| thermoplastic | |
| IEC 62392, ed. 1.0 (2006) | |
| thermoplastic elastomer, TPE | |
| IEC 62392, ed. 1.0 (2006) | |
| thermoset | |
| IEC 62392, ed. 1.0 (2006) | |
| time-to-track | |
| IEC 60587, ed. 3.0 (2007) | |
| time constant (of a standard specimen) | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| time group (of specimens) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| time to end-point | |
| IEC 60216-7-1, ed. 1.0 (2015) | |
| IEC 60216-8, ed. 1.0 (2013) | |
| track | |
| IEC 60587, ed. 3.0 (2007) | |
| tracking | |
| IEC 60587, ed. 3.0 (2007) | |
| truncated data | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| unbiased estimate (of a statistical property) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| unipolar impulse | |
| IEC 61934, ed. 2.0 (2011) | |
| unipolar impulse | |
| IEC 62068, ed. 1.0 (2013) | |
| vapour pressure | |
| IEC 60212, ed. 3.0 (2010) | |
| variance of a data group | |
| IEC 60216-3, ed. 2.0 (2006) | |
| IEC 60216-5, ed. 3.0 (2008) | |
| IEC 60216-6, ed. 2.0 (2006) | |
| IEC 60493-1, ed. 2.0 (2011) | |
| IEC 60493-2, ed. 1.0 (2010) | |
| variance of a data set | |
| IEC 60216-1, ed. 6.0 (2013) | |
| ventilation | |
| IEC 60216-4-1, ed. 4.0 (2006) | |
| virtual front time (of an impulse-voltage wave) | |
| IEC 60243-3, ed. 3.0 (2013) | |
| virtual origin (of an impulse-voltage wave) | |
| IEC 60243-3, ed. 3.0 (2013) | |
| virtual peak value (of an impulse-voltage wave) | |
| IEC 60243-3, ed. 3.0 (2013) | |
| virtual time to half-value | |
| IEC 60243-3, ed. 3.0 (2013) | |
| voltage application | |
| IEC 62631-1, ed. 1.0 (2011) | |
| voltage endurance coefficient | |
| IEC 62068, ed. 1.0 (2013) | |
| voltage endurance coefficient, VEC | |
| IEC 61251, ed. 1.0 (2015) | |
| voltage endurance, VE | |
| IEC 61251, ed. 1.0 (2015) | |
| voltage endurance, VE | |
| IEC 61251, ed. 1.0 (2015) | |
| volume resistance | |
| IEC 62631-1, ed. 1.0 (2011) | |
| volume resistivity | |
| IEC 62631-1, ed. 1.0 (2011) | |
| wire-wound electrical insulation system | |
| IEC 61858-2, ed. 1.0 (2014) | |
| wire-wound winding electrical insulation system | |
| IEC 61858-1, ed. 1.0 (2014) | |
| wire-wound winding electrotechnical device | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |
| withstand voltage | |
| IEC 60243-3, ed. 3.0 (2013) | |
| working space | |
| IEC 60212, ed. 3.0 (2010) | |
| wrapped insulated winding wire | |
| IEC 61858-1, ed. 1.0 (2014) | |
| IEC 61858-2, ed. 1.0 (2014) | |