 | | |
|---|
 5VA CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62441, ed. 2.0 (2011) | |
| 5VA class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| 5VB CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62441, ed. 2.0 (2011) | |
| 5VB class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| abnormal operating condition | |
| IEC 62368-1, ed. 3.0 (2018) | |
| AC mains supply | |
| IEC 60950-1, ed. 2.0 (2005) | |
| accessible | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| active component of duty cycle, Twork | |
| IEC 62623, ed. 1.0 (2012) | |
| active workload | |
| IEC 62623, ed. 1.0 (2012) | |
| actual energy consumption | |
| IEC 62623, ed. 1.0 (2012) | |
| antenna interface | |
| IEC 62102, ed. 2.0 (2005) | |
| arcing PIS | |
| IEC 62368-1, ed. 3.0 (2018) | |
| audio amplifier | |
| IEC 60065, ed. 8.0 (2014) | |
| available power | |
| IEC 60065, ed. 8.0 (2014) | |
| a.c. mains supply | |
| IEC 62102, ed. 2.0 (2005) | |
| backfeed | |
| IEC 62368-1, ed. 3.0 (2018) | |
| backfeed safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| basic insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| basic insulation | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| basic safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| battery | |
| IEC 62368-1, ed. 3.0 (2018) | |
| body | |
| IEC 60950-1, ed. 2.0 (2005) | |
| bounding surface | |
| IEC 60950-1, ed. 2.0 (2005) | |
| by hand | |
| IEC 60065, ed. 8.0 (2014) | |
| cable distribution system | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| calculated sound dose | |
| IEC 62368-1, ed. 3.0 (2018) | |
| candle flame accessible area | |
| IEC 62441, ed. 2.0 (2011) | |
| category | |
| IEC 62623, ed. 1.0 (2012) | |
| cell | |
| IEC 62368-1, ed. 3.0 (2018) | |
| cheesecloth | |
| IEC 60950-1, ed. 2.0 (2005) | |
| cheesecloth | |
| IEC 62368-1, ed. 3.0 (2018) | |
| chemical emissions | |
| IEC 62075, ed. 2.0 (2012) | |
| class i | |
| IEC 60065, ed. 8.0 (2014) | |
| CLASS I equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| class I equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| class ii | |
| IEC 60065, ed. 8.0 (2014) | |
| class II construction | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| CLASS II equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| class II equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| CLASS III equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| class III equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| clearance | |
| IEC 60950-1, ed. 2.0 (2005) | |
| clearance | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| coaxial cable interface | |
| IEC 62102, ed. 2.0 (2005) | |
| coin cell battery | |
| IEC 60065, ed. 8.0 (2014) | |
| coin / button cell battery | |
| IEC 62368-1, ed. 3.0 (2018) | |
| combustible material | |
| IEC 62441, ed. 2.0 (2011) | |
| combustible material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| conductive pattern | |
| IEC 60065, ed. 8.0 (2014) | |
| conductively connected to the mains | |
| IEC 60065, ed. 8.0 (2014) | |
| consumable | |
| IEC 62075, ed. 2.0 (2012) | |
| consumable material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| creepage distance | |
| IEC 60950-1, ed. 2.0 (2005) | |
| creepage distance | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| DC mains supply | |
| IEC 60950-1, ed. 2.0 (2005) | |
| DC voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| DC voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| decorative part | |
| IEC 60950-1, ed. 2.0 (2005) | |
| designer | |
| IEC 62075, ed. 2.0 (2012) | |
| detachable power supply cord | |
| IEC 60950-1, ed. 2.0 (2005) | |
| digital signal level relative to full scale | |
| IEC 62368-1, ed. 3.0 (2018) | |
| direct plug-in equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| direct plug-in equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| directly connected to the mains | |
| IEC 60065, ed. 8.0 (2014) | |
| disconnect device | |
| IEC 62368-1, ed. 3.0 (2018) | |
| double insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| double insulation | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| double safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| duty cycle | |
| IEC 62623, ed. 1.0 (2012) | |
| duty cycle attributes | |
| IEC 62623, ed. 1.0 (2012) | |
| electrical enclosure | |
| IEC 60950-1, ed. 2.0 (2005) | |
| electrical enclosure | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| electronic musical instrument | |
| IEC 60065, ed. 8.0 (2014) | |
| ELV circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| enclosure | |
| IEC 60950-1, ed. 2.0 (2005) | |
| enclosure | |
| IEC 62368-1, ed. 3.0 (2018) | |
| end of life | |
| IEC 62075, ed. 2.0 (2012) | |
| energy efficiency | |
| IEC 62075, ed. 2.0 (2012) | |
| energy saving mode | |
| IEC 62018, ed. 1.0 (2003) | |
| energy use | |
| IEC 62623, ed. 1.0 (2012) | |
| environment | |
| IEC 62075, ed. 2.0 (2012) | |
| environmental aspect | |
| IEC 62075, ed. 2.0 (2012) | |
| environmental impact | |
| IEC 62075, ed. 2.0 (2012) | |
| environmental management system | |
| IEC 62075, ed. 2.0 (2012) | |
| equipment for building-in | |
| IEC 60950-1, ed. 2.0 (2005) | |
| equipment safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| estimated energy consumption | |
| IEC 62623, ed. 1.0 (2012) | |
| explosion | |
| IEC 62368-1, ed. 3.0 (2018) | |
| explosion limit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| explosive | |
| IEC 62368-1, ed. 3.0 (2018) | |
| external circuit | |
| IEC 62368-1, ed. 3.0 (2018) | |
| external power supply, EPS | |
| IEC 62623, ed. 1.0 (2012) | |
| fire enclosure | |
| IEC 60950-1, ed. 2.0 (2005) | |
| fire enclosure | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| fixed equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| flammability classification of materials | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62441, ed. 2.0 (2011) | |
| full-on mode | |
| IEC 62018, ed. 1.0 (2003) | |
| fully insulated winding wire | |
| IEC 62368-1, ed. 3.0 (2018) | |
| functional earthing | |
| IEC 60950-1, ed. 2.0 (2005) | |
| functional earthing | |
| IEC 62368-1, ed. 3.0 (2018) | |
| functional insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| functional insulation | |
| IEC 62368-1, ed. 3.0 (2018) | |
| grade of FIW | |
| IEC 62368-1, ed. 3.0 (2018) | |
| hand-held equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| hand-held equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| hazardous energy level | |
| IEC 60950-1, ed. 2.0 (2005) | |
| hazardous live | |
| IEC 60065, ed. 8.0 (2014) | |
| hazardous substance | |
| IEC 62368-1, ed. 3.0 (2018) | |
| hazardous substances and preparations | |
| IEC 62075, ed. 2.0 (2012) | |
| hazardous voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| HB40 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| HB40 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| HB75 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| HB75 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| HBF CLASS foamed material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| HBF class foamed material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| HF-1 CLASS foamed material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| HF-1 class foamed material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| HF-2 CLASS foamed material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| HF-2 class foamed material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| highest specified charging temperature | |
| IEC 62368-1, ed. 3.0 (2018) | |
| (household and home/office document/media) shredder | |
| IEC 60950-1, ed. 2.0, amd. 1 (2009) | |
| imagery | |
| IEC 60065, ed. 8.0 (2014) | |
| individual item | |
| IEC 62441, ed. 2.0 (2011) | |
| information and communication technology network | |
| IEC 62368-3, ed. 1.0 (2017) | |
| installation safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| instructed person | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| instructional safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| insulating liquid | |
| IEC 62368-1, ed. 3.0 (2018) | |
| interconnecting cable | |
| IEC 60950-1, ed. 2.0 (2005) | |
| intermittent operation | |
| IEC 62368-1, ed. 3.0 (2018) | |
| internal power supply, IPS | |
| IEC 62623, ed. 1.0 (2012) | |
| isolating transformer | |
| IEC 60065, ed. 8.0 (2014) | |
| laser | |
| IEC 60065, ed. 8.0 (2014) | |
| laser system | |
| IEC 60065, ed. 8.0 (2014) | |
| life cycle | |
| IEC 62075, ed. 2.0 (2012) | |
| limited current circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| load transducer | |
| IEC 60065, ed. 8.0 (2014) | |
| local area network, LAN | |
| IEC 62623, ed. 1.0 (2012) | |
| long idle component of duty cycle, Tidle | |
| IEC 62623, ed. 1.0 (2012) | |
| lowest specified charging temperature | |
| IEC 62368-1, ed. 3.0 (2018) | |
| mains | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| mains supply | |
| IEC 60950-1, ed. 2.0 (2005) | |
| mains switch | |
| IEC 60065, ed. 8.0 (2014) | |
| mains transient voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| mains transient voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| manually operated mechanical switch | |
| IEC 60065, ed. 8.0 (2014) | |
| manufacturer | |
| IEC 62075, ed. 2.0 (2012) | |
| IEC 62623, ed. 1.0 (2012) | |
| material flammability class | |
| IEC 62368-1, ed. 3.0 (2018) | |
| maximum specified charging current | |
| IEC 62368-1, ed. 3.0 (2018) | |
| maximum specified charging voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| mechanical enclosure | |
| IEC 60950-1, ed. 2.0 (2005) | |
| mechanical enclosure | |
| IEC 62368-1, ed. 3.0 (2018) | |
| micro-disconnection | |
| IEC 60065, ed. 8.0 (2014) | |
| module | |
| IEC 62075, ed. 2.0 (2012) | |
| momentary exposure level | |
| IEC 62368-1, ed. 3.0 (2018) | |
| movable equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| movable equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| network termination point | |
| IEC 62102, ed. 2.0 (2005) | |
| noise signal | |
| IEC 60065, ed. 8.0 (2014) | |
| non-clipped output power | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| non-detachable power supply cord | |
| IEC 60950-1, ed. 2.0 (2005) | |
| non-detachable power supply cord | |
| IEC 62368-1, ed. 3.0 (2018) | |
| normal load | |
| IEC 60950-1, ed. 2.0 (2005) | |
| normal operating condition | |
| IEC 62368-1, ed. 3.0 (2018) | |
| off component of duty cycle, Toff | |
| IEC 62623, ed. 1.0 (2012) | |
| on components of duty cycle, Ton | |
| IEC 62623, ed. 1.0 (2012) | |
| operator | |
| IEC 60950-1, ed. 2.0 (2005) | |
| operator access area | |
| IEC 60950-1, ed. 2.0 (2005) | |
| ordinary person | |
| IEC 62368-1, ed. 3.0 (2018) | |
| organization | |
| IEC 62075, ed. 2.0 (2012) | |
| outdoor enclosure | |
| IEC 60950-22, ed. 1.0 (2005) | |
| outdoor enclosure | |
| IEC 62368-1, ed. 3.0 (2018) | |
| outdoor equipment | |
| IEC 60950-22, ed. 1.0 (2005) | |
| outdoor equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| outdoor location | |
| IEC 60950-22, ed. 1.0 (2005) | |
| outdoor location | |
| IEC 62368-1, ed. 3.0 (2018) | |
| paired conductor interface | |
| IEC 62102, ed. 2.0 (2005) | |
| part | |
| IEC 62075, ed. 2.0 (2012) | |
| passive flammability | |
| IEC 60065, ed. 8.0 (2014) | |
| peak response frequency | |
| IEC 62368-1, ed. 3.0 (2018) | |
| peak working voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| permanently connected apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| permanently connected equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| permanently connected equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| personal safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| pink noise | |
| IEC 60065, ed. 8.0 (2014) | |
| pluggable equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| pluggable equipment TYPE A | |
| IEC 60950-1, ed. 2.0 (2005) | |
| pluggable equipment type A | |
| IEC 62368-1, ed. 3.0 (2018) | |
| pluggable equipment TYPE B | |
| IEC 60950-1, ed. 2.0 (2005) | |
| pluggable equipment type B | |
| IEC 62368-1, ed. 3.0 (2018) | |
| pollution degree | |
| IEC 62368-1, ed. 3.0 (2018) | |
| portable apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| potential ignition source | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| power sourcing equipment | |
| IEC 62368-3, ed. 1.0 (2017) | |
| powered device | |
| IEC 62368-3, ed. 1.0 (2017) | |
| precautionary safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| preparations | |
| IEC 62075, ed. 2.0 (2012) | |
| primary circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| printed board | |
| IEC 60065, ed. 8.0 (2014) | |
| product | |
| IEC 62075, ed. 2.0 (2012) | |
| professional apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| professional equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| prospective touch voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| protective bonding conductor | |
| IEC 60950-1, ed. 2.0 (2005) | |
| protective bonding conductor | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective conductor | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective conductor current | |
| IEC 60950-1, ed. 2.0 (2005) | |
| protective conductor current | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective current rating | |
| IEC 60950-1, ed. 2.0 (2005) | |
| protective current rating | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective earthing | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective earthing conductor | |
| IEC 60950-1, ed. 2.0 (2005) | |
| protective earthing conductor | |
| IEC 62368-1, ed. 3.0 (2018) | |
| protective earthing terminal | |
| IEC 60065, ed. 8.0 (2014) | |
| protective screening | |
| IEC 60065, ed. 8.0 (2014) | |
| protective separation | |
| IEC 60065, ed. 8.0 (2014) | |
| ptc thermistor | |
| IEC 60065, ed. 8.0 (2014) | |
| rated current | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated current | |
| IEC 62368-1, ed. 3.0 (2018) | |
| rated current consumption | |
| IEC 60065, ed. 8.0 (2014) | |
| rated frequency | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated frequency | |
| IEC 62368-1, ed. 3.0 (2018) | |
| rated frequency range | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated load impedance | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| rated operating time | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated power | |
| IEC 62368-1, ed. 3.0 (2018) | |
| rated power consumption | |
| IEC 60065, ed. 8.0 (2014) | |
| rated resting time | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated supply voltage | |
| IEC 60065, ed. 8.0 (2014) | |
| rated voltage | |
| IEC 60950-1, ed. 2.0, amd. 2 (2013) | |
| rated voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| rated voltage range | |
| IEC 60950-1, ed. 2.0 (2005) | |
| rated voltage range | |
| IEC 62368-1, ed. 3.0 (2018) | |
| reasonably foreseeable misuse | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| recycling | |
| IEC 62075, ed. 2.0 (2012) | |
| red green blue, RGB | |
| IEC 62623, ed. 1.0 (2012) | |
| reinforced insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| reinforced insulation | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| reinforced safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| remote control | |
| IEC 60065, ed. 8.0 (2014) | |
| remote power feeding | |
| IEC 60065, ed. 8.0 (2014) | |
| renewable material | |
| IEC 62075, ed. 2.0 (2012) | |
| required withstand voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| required withstand voltage | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| resistive PIS | |
| IEC 62368-1, ed. 3.0 (2018) | |
| restricted access area | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| restricted access location | |
| IEC 60950-1, ed. 2.0 (2005) | |
| reuse | |
| IEC 62075, ed. 2.0 (2012) | |
| RFT-C circuit | |
| IEC 60950-21, ed. 1.0 (2002) | |
| IEC 62102, ed. 2.0 (2005) | |
| RFT-V circuit | |
| IEC 60950-21, ed. 1.0 (2002) | |
| IEC 62102, ed. 2.0 (2005) | |
| RFT C circuit | |
| IEC 62368-3, ed. 1.0 (2017) | |
| RFT circuit | |
| IEC 62102, ed. 2.0 (2005) | |
| RFT circuit | |
| IEC 62368-3, ed. 1.0 (2017) | |
| RFT circuit; remote feeding telecommunication circuit | |
| IEC 60950-21, ed. 1.0 (2002) | |
| RFT V circuit | |
| IEC 62368-3, ed. 1.0 (2017) | |
| ripple free | |
| IEC 60065, ed. 8.0 (2014) | |
| RMS working voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| RMS working voltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| routine test | |
| IEC 60950-1, ed. 2.0 (2005) | |
| routine test | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| safety interlock | |
| IEC 60950-1, ed. 2.0 (2005) | |
| safety interlock | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| sampling test | |
| IEC 60950-1, ed. 2.0 (2005) | |
| sampling test | |
| IEC 62368-1, ed. 3.0 (2018) | |
| secondary circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| secondary lithium battery | |
| IEC 62368-1, ed. 3.0 (2018) | |
| SELV circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| separating transformer | |
| IEC 60065, ed. 8.0 (2014) | |
| service access area | |
| IEC 60950-1, ed. 2.0 (2005) | |
| service person | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| short-time operation | |
| IEC 62368-1, ed. 3.0 (2018) | |
| short idle component of duty cycle, Tsidle | |
| IEC 62623, ed. 1.0 (2012) | |
| single fault condition | |
| IEC 62368-1, ed. 3.0 (2018) | |
| skill safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| skilled person | |
| IEC 62075, ed. 2.0 (2012) | |
| skilled person | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| sleep component of duty cycle, Tsleep and TsleepWoL | |
| IEC 62623, ed. 1.0 (2012) | |
| solid insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| solid insulation | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| sound exposure | |
| IEC 62368-1, ed. 3.0 (2018) | |
| sound exposure level | |
| IEC 62368-1, ed. 3.0 (2018) | |
| source transducer | |
| IEC 60065, ed. 8.0 (2014) | |
| special battery | |
| IEC 60065, ed. 8.0 (2014) | |
| special supply apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| stand-by | |
| IEC 60065, ed. 8.0 (2014) | |
| stationary equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| stationary equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| stored energy mode | |
| IEC 62368-1, ed. 3.0 (2018) | |
| substance | |
| IEC 62075, ed. 2.0 (2012) | |
| supplementary insulation | |
| IEC 60950-1, ed. 2.0 (2005) | |
| supplementary insulation | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| supplementary safeguard | |
| IEC 62368-1, ed. 3.0 (2018) | |
| supply apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| supply apparatus for general use | |
| IEC 60065, ed. 8.0 (2014) | |
| telecommunication network | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| telecommunication network | |
| IEC 60065, ed. 8.0 (2014) | |
| telecommunication network transient voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| telecommunication network transient voltage | |
| IEC 60065, ed. 8.0 (2014) | |
| temperature limiter | |
| IEC 60950-1, ed. 2.0 (2005) | |
| temperature limiter | |
| IEC 62368-1, ed. 3.0 (2018) | |
| temporary overvoltage | |
| IEC 62368-1, ed. 3.0 (2018) | |
| terminal | |
| IEC 60065, ed. 8.0 (2014) | |
| terminal connection point | |
| IEC 62102, ed. 2.0 (2005) | |
| thermal cut-off | |
| IEC 62368-1, ed. 3.0 (2018) | |
| thermal cut-out | |
| IEC 60950-1, ed. 2.0 (2005) | |
| thermal cut-out | |
| IEC 60065, ed. 8.0 (2014) | |
| thermal cut-out, automatic reset | |
| IEC 60950-1, ed. 2.0 (2005) | |
| thermal cut-out, manual reset | |
| IEC 60950-1, ed. 2.0 (2005) | |
| thermal link | |
| IEC 60065, ed. 8.0 (2014) | |
| thermal release | |
| IEC 60065, ed. 8.0 (2014) | |
| thermostat | |
| IEC 60950-1, ed. 2.0 (2005) | |
| thermostat | |
| IEC 62368-1, ed. 3.0 (2018) | |
| tnv-0 circuit | |
| IEC 60065, ed. 8.0 (2014) | |
| TNV-1 circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| tnv-1 circuit | |
| IEC 60065, ed. 8.0 (2014) | |
| TNV-2 circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| tnv-2 circuit | |
| IEC 60065, ed. 8.0 (2014) | |
| TNV-3 circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| tnv-3 circuit | |
| IEC 60065, ed. 8.0 (2014) | |
| TNV circuit | |
| IEC 60950-1, ed. 2.0 (2005) | |
| tnv circuit | |
| IEC 60065, ed. 8.0 (2014) | |
| TNV circuit (including TNV-1 circuit, TNV-2 circuit, TNV-3 circuit) | |
| IEC 62102, ed. 2.0 (2005) | |
| tool | |
| IEC 60950-1, ed. 2.0 (2005) | |
| tool | |
| IEC 62368-1, ed. 3.0 (2018) | |
| touch current | |
| IEC 60950-1, ed. 2.0 (2005) | |
| touch current | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| transportable apparatus | |
| IEC 60065, ed. 8.0 (2014) | |
| transportable equipment | |
| IEC 60950-1, ed. 2.0 (2005) | |
| transportable equipment | |
| IEC 62368-1, ed. 3.0 (2018) | |
| trip-free | |
| IEC 60065, ed. 8.0 (2014) | |
| type test | |
| IEC 60950-1, ed. 2.0 (2005) | |
| type test | |
| IEC 62368-1, ed. 3.0 (2018) | |
| typical energy consumption, TEC | |
| IEC 62623, ed. 1.0 (2012) | |
| upgrading | |
| IEC 62075, ed. 2.0 (2012) | |
| use stage | |
| IEC 62075, ed. 2.0 (2012) | |
| user | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62102, ed. 2.0 (2005) | |
| user | |
| IEC 60065, ed. 8.0 (2014) | |
| user of the test results | |
| IEC 62623, ed. 1.0 (2012) | |
| V-0 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62441, ed. 2.0 (2011) | |
| V-0 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| V-1 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| IEC 62441, ed. 2.0 (2011) | |
| V-1 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| V-2 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| V-2 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| VTM-0 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| VTM-0 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| VTM-1 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| VTM-1 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| VTM-2 CLASS material | |
| IEC 60950-1, ed. 2.0 (2005) | |
| VTM-2 class material | |
| IEC 62368-1, ed. 3.0 (2018) | |
| wake on LAN, WoL | |
| IEC 62623, ed. 1.0 (2012) | |
| wireless power transmitter | |
| IEC 62368-1, ed. 3.0 (2018) | |
| wood-based material | |
| IEC 60065, ed. 8.0 (2014) | |
| work cell | |
| IEC 60950-23, ed. 1.0 (2005) | |
| work cell | |
| IEC 62368-1, ed. 3.0 (2018) | |
| working voltage | |
| IEC 60950-1, ed. 2.0 (2005) | |
| working voltage | |
| IEC 60065, ed. 8.0 (2014) | |
| IEC 62368-1, ed. 3.0 (2018) | |
| IEC 62368-2, ed. 2.0 (2015) | |
| wrapping tissue | |
| IEC 60950-1, ed. 2.0 (2005) | |
| wrapping tissue | |
| IEC 62368-1, ed. 3.0 (2018) | |
| type test | |
| IEC 60065, ed. 8.0 (2014) | |