|Alternative names:||Plan, Section, Cut, Sketch, View|
|Content of information:||Description:|
Presentation mainly using the drawing form by showing, usually to scale, the objects and their relative position to each other.
NOTE - Plans, sections, cuts, sketches and views as defined in ISO 10209-1 are specific kinds of drawings. [IEC 61082-1]
Technical information, given on an information carrier, graphically presented in accordance with agreed rules and usually to scale [ISO 15519-1]
|Activity area:||Basic document kinds|
|Form of presentation:||L - Drawing|
|Remarks:||Drawing is an elementary presentation that can be applied as a single part in a homogeneous document kind, or as one part out of several in a composite document kind. |
The X in front of the name above indicates that if the document kind is homogeneous the name may be supplemented by an appropriate qualifier. For examples, see some of the references to "Applied in" below.
For a homogeneous document kind the name may also be used without qualifier provided that, when applied, the content is appropriately described by the title of the document. For further information, please refer to the "General description" to the left.
|Applied in:||D00010 (XXX Standard), D00011 (XXX Description), D00012 (XXX Information), D00014 (XXX Manual), D00016 (XXX Report), D00017 (XXX Specification), D00018 (XXX Instruction (for the use of an object)), D00032 (Dimension drawing), D00062 (Arrangement drawing (site)), D00063 (Arrangement drawing (building)), D00064 (Arrangement drawing (equipment)), D00086 (Site plan (base document for electrical installation)), D00089 (Cable routing drawing (site)), D00091 (Cable routing drawing (building)), D00092 (Earthing drawing (site)), D00093 (Earthing drawing (building)), D00094 (Earthing plan (site)), D00095 (Earthing plan (building)), D00096 (Installation drawing (site)), D00097 (Installation drawing (building)), D00098 (Installation plan (site)), D00099 (Installation plan (building)), D00100 (Building drawing (base document for electrical installation)), D00101 (Assembly drawing), D00131 (Component drawing), D00155 (Escape plan), D00157 (Fire protection plan), D00158 (Noise protection plan), D00201 (Screen display layout drawing), D00205 (Ground plan), D00206 (Excavation plan), D00207 (Foundation drawing), D00208 (Reinforcement drawing), D00209 (Static drawing), D00223 (Concept drawing), D00224 (Design drawing), D00225 (Development plan), D00226 (Interface drawing), D00227 (Exploded-view drawing), D00228 (3D-drawing), D00229 (Manufacturing drawing), D00230 (Drilling plan), D00231 (Welding plan), D00232 (Layout drawing)|
|Keywords:||cuts, plans, sections, sketches, views|
|Source references:||IEC 61082-1, ISO 15519-1|